1.2 KiB
How to use the remote driver
Prerequisites
Before proceeding you will need to have monado installed (or built) and capable
of running applications. If you do not have any hardware this should still work
with the dummy driver. For those building Monado themselves you have to make
sure the GUI is built. In short the commands monado-gui and monado-service
are needed.
Running
Open up three terminals and in the first run this command:
P_OVERRIDE_ACTIVE_CONFIG="remote" <path-to>/monado-serivce
If you get a error saying ERROR [u_config_json_get_remote_port] No remote node
you can safely ignore that. Once it is up and running you can now start and
connect the controller GUI. Select the second terminal use the command below and
click connect.
monado-gui remote
You can now launch the program. You technically don't need to launch the program after @p monado-gui, once the service is running they can be launched in any order.
hello_xr -G Vulkan2
Now you can manipulate the values and control the devices.