Relation history was being accessed guarded by an external lock in a couple of
places. This is redundant since its implementation already defines an internal
lock.
Relation history was being accessed guarded by an external lock in a couple of
places. This is redundant since its implementation already defines an internal
lock.
Fixes GCC 13 warning [-Wenum-int-mismatch].
Use same return type in for r_create_devices definition in r_hub.c as in
the declaration in r_interface.h.
The function was already returning correct xrt_result_t.
For one thing this applies the calibrated gyro and acceleromater bias
provided by the Reverb G2 controllers via the WMR protocol to
to the according sensor values of the controller. For another,
this applies the temperature mixing matrix in the same, partial way as
it is applied to the HMD. That is it currently disregards the polynomial
coefficiency nature - which is okay for the Reverb G2 as any temperature
dependant, non-constant coefficients in the mixing matrix seem to always
be 0 in the calibration data for it.
All this is, in theory, to reduce drifting. However for the Reverb G2 it
did not eliminate it completly, seemingly like for the HMD the
controllers were never temperature calibrated (controllers and HMD use
the same TDK/InvenSense ICM-20602 chip).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Similar to the HP Reverb G2 controllers apply the rotations
provided by their calibration data.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
We can't take the IMU values of the Reverb G2 controller as is.
We need to compensate for how the IMU chip is oriented on the
hardware.
Similar to the WMR HMD the WMR controllers' firmware configuration
provides us with the transformations necessary to adjust the
controller orientations. So apply them to fix the orientation
issues.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Not only the sensor values from the HMD need to be transformed from WMR
to OpenXR but also the sensor values from the controllers. Therefore
restructuring the according code to be useable by both the WMR HMD and
WMR controller code.
No functional changes.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Implement support for SteamVR's Lighthouse driver (on Linux).
Only tested/works with the OG Vive and Vive wands, but adding new
device support should be simple.
While in the Monado debug GUI the squeeze trigger is detected fine and
it is also listed in the SteamVR "Test Controller" page, pushing the
squeeze trigger would not be detected in SteamVR.
Fixing this by not just populating the xrt_inputs squeeze click but also
the squeeze value.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
By using an extra, final entry in the according inputs enum instead
of using a hard coded number it should be slightly safer and easier
to verify that the to be allocated inputs array is of correct size.
No functional change.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
